Light Output
Up to 500 lumens according to the current product description.
Advertisement · Product Information Page
Rechargeable LED Lighting for Fixture, Handheld and Hanging Use
EternaLight is advertised as an A21 rechargeable LED bulb with an E26 screw base, portable socket cap and accessory hook.
- Advertised output of up to 500 lumens
- Advertised runtime of up to 6 hours
- Approximately 4-hour compatible-fixture charge
- Approximately 8-hour direct-sunlight charge
Current advertised unit price: £7.43. Confirm VAT, delivery, the legal seller and electrical compatibility before purchase. Submitting the form does not place an order and no payment is taken on this page.
£7.43 Per Unit
The displayed price is for one bulb. Confirm whether VAT and delivery are included.
Advertised 500 Lumens
Actual brightness may vary by operating mode, charge level and product condition.
Up to 6 Hours
The maximum advertised battery runtime assumes a fully charged battery and suitable conditions.
How EternaLight Is Advertised to Work
The product description presents EternaLight as a rechargeable emergency bulb that can be used in three distinct modes. These are seller-supplied claims rather than independent test results.
Compatible-Fixture Mode
The bulb is intended to provide normal LED lighting and charge its internal battery while installed in a compatible powered fixture.
Handheld or Tabletop Mode
After charging, the supplied E26 socket cap can be attached and its On/Off button used to operate the bulb away from a fixture.
Hanging-Lantern Mode
The supplied accessory hook is intended for hanging use in locations permitted by the official product instructions.
Advertised Specification and Package Details
Check these details against the label and documentation of the exact product supplied.
Battery Runtime
Up to 6 hours after a full charge. Runtime may reduce with battery age, temperature and mode.
Charging
Approximately 4 hours in a compatible powered fixture or about 8 hours in clear, direct sunlight.
Format and Accessories
A21 bulb shape, E26 screw base, one E26 socket cap and one accessory hook.
UK Electrical Compatibility Must Be Confirmed
The supplied product information describes an A21/E26 model. Available listings for the same model identify a 100–120V, 60Hz electrical rating, while standard UK domestic electricity is 230V, 50Hz.
Read the Product Label
Use the bulb in a mains fixture only if the exact unit is explicitly marked for 220–240V, 50Hz.
Check the Fitting
E26 is not the usual UK domestic designation. Confirm physical and electrical compatibility with the intended fitting before installation.
Request Compliance Documents
Ask for the declaration of conformity, CE or UKCA marking information, English instructions and UK importer contact details.
Safety warning: Do not connect a 100–120V-only unit to a standard UK 230V mains
circuit. Do not touch, bridge or use your hand to complete exposed electrical contacts. Use only the
supplied socket cap and documented controls.
Frequently Asked Questions
The current advertised price is £7.43 for one bulb. Confirm whether VAT,
delivery and any additional charges are included before purchasing.
The supplied product description states an output of up to 500 lumens. This is an advertised
specification and should be checked against the product label and documentation.
The advertised maximum is up to 6 hours after a full charge. Actual runtime can vary with
charge level, battery age, operating mode and environmental conditions.
The seller states approximately 4 hours in a compatible powered fixture or approximately
8 hours with the solar panel in clear, direct sunlight.
Not unless the exact supplied unit is marked for 220–240V, 50Hz and the E26 base is compatible
with the intended fitting. Do not install a 100–120V-only model in a UK 230V mains circuit.
After charging, securely attach the supplied E26 socket cap and use its On/Off button.
The accessory hook may be used only as permitted by the official instructions.
No. Do not use your hand or another object to bridge exposed electrical contacts. Use only
the supplied socket cap, integrated switch and documented operating methods.
This page does not promise a specific bill reduction. Any saving depends on the bulb being
replaced, wattage, use, tariff and charging method.
No. The form is a no-obligation product-information request. No payment is taken and no
purchase contract is formed on this page.
Request Product and Compatibility Information
- Current advertised price: £7.43 per bulb
- Confirm VAT and delivery charges
- Confirm the exact voltage and E26 compatibility
- Ask for warranty, returns and seller details
This is an enquiry form, not an order form. Before publication, the Privacy Policy and this form must identify the exact legal entity receiving and using the submitted details.
Request Information
Ask about the exact model, compatibility, full price, delivery, warranty and returns.